Hardware Installation - A4Tech G6-70D User Manual

Hardware Installation

Step 1: Inserting the Batteries
A. Press the tab on the battery cover
locates on the mouse bottom as
shown here and remove the cover.
Step 2: Connect the Receiver
A. For Notebook computer:
Insert the USB receiver into the USB port of your Notebook
computer.
B. Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of the battery
match the polarity indicators inside the battery
housing.
A. For PC computer:
Insert the USB receiver into the USB port of desktop computer or
via a USB HUB.
C. Slide the batter cover back into its
position until it "clicks" firmly into place.
- 4 -