A4Tech RFSOP-27A User Manual page 5

Connecting the RF Optical Mouse ID Code
When the driver installation is finished, your computer reboots and the RF
Optical Mouse window (shown on the right) appears.
CONNECT ID: Move the RF Optical Mouse for a few seconds to establish a
connection, and then click Connect ID. The unique ID code of your mouse is
recognized and another RF pointing device will not function on your computer.
Exit: Click Exit if no other RF pointing devices are within 3 meters range or if
you want other RF pointing devices to be able to access your computer.
Changing the RF Optical Mouse ID Code
You can use a new RF Optical Mouse on your computer without changing the Radio receiver. Just need to change the ID code. Refer to
the following:
1. Press [Shift + Alt + F11] or [Shift + Alt + F12] to call up the RF Optical Mouse ID Code window.
2. Move the RF Optical Mouse for a few seconds to establish a connection
3. Click Connect ID.
4. The new ID code is Connected and the RF Optical Mouse window closes.
5. Click Exit to close the RF Optical Mouse ID code window.
Identifying Components
The mouse is designed to fit snugly into your hand. The scroll wheel is positioned on the top allowing for easy operation with
the index finger. Standard mouse buttons are positioned to either side of the scroll wheels and can be reached comfortably
with the index and ring fingers. A third button is placed under the vertical wheel and can be easily clicked by pushing down
on the wheel.
The following pages will tell you how to configure the scroll wheels and buttons to suit your specific needs.
— 4 —