The Linde Group Warranty - Linde G-TECTA 4G Operating Manual

22
The Linde Group Instrumentation
Warranty Gas Detection Products
General
The Linde Group warrants gas detectors, sensors
and accessories manufactured and sold by
The Linde Group to be free from defects in
materials and workmanship for the periods listed
in the following tables. Damages to any Linde
Group products that result from abuse, alteration,
power fluctuations including surges and lightning
strikes, incorrect voltage settings, incorrect
batteries, or repair procedures not made in
accordance with the product's Operating Manual,
are not covered by The Linde Group warranty.
The obligation of The Linde Group under this
warranty is limited to the repair or replacement of
components deemed by The Linde Group Service
Department to have been defective under the scope
of this standard warranty. To receive consideration
for warranty repair or replacement procedures,
products must be returned with transportation and
shipping charges prepaid to The Linde Group, or to
a Linde Group Authorised Warranty Service Centre.
It is necessary to obtain a return authorisation
number from The Linde Group prior to shipment.
THIS WARRANTY IS EXPRESSLY IN LIEU OF
ANY AND ALL OTHER WARRANTIES AND
REPRESENTATIONS, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE WARRANTY
OF FITNESS FOR A PARTICULAR PURPOSE. THE
LINDE GROUP WILL NOT BE LIABLE FOR LOSS OR
DAMAGE OF ANY KIND CONNECTED TO THE USE OF
ITS PRODUCTS OR FAILURE OF ITS PRODUCTS TO
FUNCTION OR OPERATE PROPERLY.
Warranty periods for instruments
and accessories
Product
G-TECTA SG
®
G-TECTA 4G
®
G-TECTA 4GP
®
G-TECTA SG
®
2
G-DOCKA SG
®
2
G-DOCKA Hub
®
Instrument chargers/interfaces
Battery packs, pumps and consumables
Warranty periods for sensors
Sensor type
Oxygen & Flammable Sensors
H S & CO Toxic Sensors
2
All other Toxic Sensors
** Damage to combustible gas sensors by acute or chronic
exposure to known sensor poisons such as volatile lead
(aviation gasoline additive), hydride gases such as phosphine,
and volatile silicone gases emitted from silicone caulks/
sealants, silicone rubber moulded products, laboratory glassware
greases, spray lubricants, heat-transfer fluids, waxes and
polishing compounds (neat or spray aerosols), mould-release
agents for plastics injection-moulding operations, waterproofing
formulations, vinyl and leather preservatives, and hand lotions
that may contain ingredients listed as cyclomethicone, dimethicone
and polymethicone (at the discretion of The Linde Group Service
department) void The Linde Group's Standard Warranty as it applies
to the replacement of combustible gas sensors.
Warranty period
2 years from
date of purchase
2 years from
date of purchase
1 year from
date of purchase
2 years from
date of purchase
2 years from
date of purchase
1 year from
date of purchase
Warranty period
2 years
2 years
1 year