Linde G-TECTA 4G Operating Manual page 11

3. Switch off the G-TECTA
and place the instrument
into the charger in an
upright position with the
screen facing outwards.
When the instrument is charging, the red LED on
the charger cradle will be lit. When the instrument
is fully charged, the red LED will fade. When
G-TECTA 4G is fully charged and switched on the
®
battery icon will show six black bars.
Note: If the G-TECTA
®
charging, the battery icon will sweep from empty
to full, the instrument will take longer to charge,
and the battery icon will take 20 seconds to update
on removal from the charging cradle.
Changing Rechargeable Batteries
If you experience a noticeable reduction in
battery life in the instrument, rechargeable
batteries should be replaced by a Linde Group
Authorised Service Centre.
Note: To ensure hazardous area and instrument
ingress protection certification is maintained,
battery replacement should only be carried out by
trained and certified personnel.
Wearing G-TECTA
G-TECTA 4G is supplied with a strong and durable
®
alligator clip. The alligator clip will securely attach
the instrument to a pocket, lapel, sleeve, belt etc.
4G
®
4G is switched on during
4G Instruments
®
G-TECTA 4G Chest/Neck Harness
®
The optional chest/neck harness allows the user
to mount the instrument on the chest or around
the neck for additional comfort.
Attaching the Chest Harness Plate
The chest harness plate is attached to the
instrument by replacing the alligator clip.
1. Remove the M3 screw on the back of the
G-TECTA 4G.
®
2. Remove the alligator clip.
3. Position the chest harness plate and align
the screw holes.
4. Attach the screw and tighten.
Neck Strap
Attach the strap to the top connectors and place
around the neck. Adjust the length of the strap until
the instrument is in a comfortable working position.
Chest Harness
Leave the neck strap in position. Attach the other
strap to the side connectors and link around the
chest. Adjust the strap lengths until the instrument
is in a comfortable working position.
11