Quick Start - Logic3 Scuderia FS1 (2LFS001) User Manual

Quick Start

Powering your player ON
To power the player ON:
1
Plug AC cord into AC socket, and plug into a live AC wall outlet.
2
P ress the Power/Pairing/Function
ON mode.
3
P ress and hold the Power/Pairing/Function
button on the remote control to switch the player to Standby mode.
!
Note: To save power, the player will enter Standby mode from ON mode automatically if there is no audio input for 15 minutes.
Line in connection
1
Connect a sound sources with a Line or
headphone analogue output to play
through your player as below hookup
diagram shown.
Headphone socket
•
iPod models that cannot be docked to unit
•
MP3 players
•
CD walkman players
•
Tape walkman players
•
Personal computers or laptops
Charging your device with USB port
1
Charge your device using the USB Type
"A" connector.
!
Noted: USB port will stop charging your
device when docking the iPhone/iPad/
iPod on the Docking Connector.
English
button on the top panel or the
button on the top panel for 2 to 5 seconds and then release or press the
2
Press the Power/Pairing/Function
button on the top panel or press the
button to select the AUX mode.
Green light indicates.
3.5mm jack cable (included)
USB cable (Not included)
Power button on the remote control to switch the player to
3
On the left of the bottom panel
To AUX jack
On the left of the bottom panel
Power
Set your personal audio player/
computer to PLAY.
To USB port
5