Setting The Channel Levels; Using The On-Screen Displays; Playing Discs - Pioneer HTZ170DVD Operating Instructions Manual

Getting started

Setting the channel levels

Set the relative channel levels from your main
1
listening position.
1 Press SHIFT+TEST TONE.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• SR – Right surround speaker
• SL – Left surround speaker
2
• SW – Subwoofer
2 Use the VOLUME +/– button to adjust
the volume to an appropriate level.
Use / to adjust the speaker levels in
3
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ±10 dB.
4 When you're done, press ENTER to exit
test tone setup.

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the
same way, using , , ,  to change the
highlighted item and pressing ENTER to select
3
it.
Note
1 • This is only available when DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged.
• To adjust the overall balance while listening to any sound source you want, press SHIFT+SETUP, use / to select
CH LEVEL then press ENTER. Use / to switch between channels, and / to adjust the channel levels. Press ENTER
when you're finished.
2 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.
3 The screen saver will appear after five minutes of inactivity.
Important
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
Button What it does
HOME Displays/exits the on-screen display
MENU
 Changes the highlighted menu item
ENTER Selects the highlighted menu item
RETURN Returns to the main menu without
saving changes
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video/WMV
and WMA/MP3/MPEG-4 AAC discs are
covered here. Further functions are detailed in
chapter 4.
1 If the player isn't already on, switch it on.
If you're playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.
02
11
En