Music Services - Sony MHC-V77W Operating Instructions Manual

Hide thumbs Also See for MHC-V77W:
Table of Contents

Advertisement

Check the settings of the wireless
• •
LAN router/access point. If the
SSID stealth mode is set to "On"
on the access point, set it to "Off".
For details on the settings of the
access point of the wireless router,
refer to the operating manual of
the access point.
Set the BLUETOOTH/Wi-Fi signal
• •
to "RF ON" (page 48).
The system cannot connect to the
network using WPS.
Set up your network after
• •
searching the access point using
the access point scan.
You cannot connect to a network
• •
using WPS when your access point
is set to WEP.
Update the firmware of the
• •
wireless LAN router/access point
to the latest version.

Music Services

The system cannot connect to
Music Services.
Make sure the wireless LAN
• •
router/access point is turned on.
Check that
is lit on the display.
• •
If not, set up a wireless network
again. For details, see Wi-Fi
Startup Guide.
When the system is connected
• •
to a wireless network, place the
wireless LAN/access point and
the system closer together and
perform the setup again.
Depending on the providers, only
• •
one connection to Internet is
allowed.
When you turn on your mobile
• •
phone (Android device, Xperia
device, or iPhone/iPod touch)
after a moment of power off, try to
restart the "SongPal" application.
Home Network
The controller (the operating
device) cannot find this system.
(The controller cannot browse the
contents of this system.)
Make sure that the controller is
• •
connected to the home network.
The multicast control on the
• •
access point is enabled.
Music started automatically.
This system may be controlled
• •
by another equipment. To block
such control, set the BLUETOOTH/
Network standby mode to off
(page 48).
The sound is interrupted.
The DLNA server is overloaded.
• •
Quit all running applications.
The wireless signal has
• •
interference. Turn off other
devices such as your microwave
oven.
The communications speed of the
• •
wireless LAN may become slower
for IEEE802.11n-compliant wireless
LAN routers/access points if the
security method is set to WEP
or WPA/WPA2-PSK (TKIP). If the
speed becomes slower, change
the security method to
WPA/WPA2-PSK (AES).
The encryption (security) scheme
varies depending on the device.
For details, refer to the operating
instructions of your router/access
point.
Tuning or playback cannot be
performed.
Confirm that the audio file is
• •
improper or has been deleted
from the server. Refer to the
operating instructions of the
server.
55
US

Advertisement

Table of Contents
loading

Table of Contents