Important Safety Instructions - Sling Media SB260-100 Quick Start Manual

Slingbox solo
Table of Contents

Advertisement

Important safety instructions

Please read all of these instructions and retain for future reference. Follow all warnings and instructions.
Do not use Slingbox SOLO near water.
Do not place the product near heat sources such as direct sunlight, radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not block the ventilation holes on top of the Slingbox SOLO. Slingbox SOLO requires adequate ventilation.
Do not place Slingbox SOLOin a cabinet or built-in installation unless sufficient ventilation is provided. Do not
place anything on top of the Slingbox SOLO, including another Slingbox SOLO.
Operate this product from the type of power source indicated on the marking label.
Route power cables so they are not likely to be walked on, rolled over, or pinched by items placed upon or
against them, or otherwise subject to abuse, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Never push objects of any kind into this product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Unplug Slingbox SOLO before cleaning. Use only a dry cloth to clean the Slingbox SOLO.
Do not place this product on an unstable cart, stand, tripod, bracket, or table.
Outdoor antenna grounding. If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70 1984, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
Lightning. For added protection of this product during a lightning storm, or when it is left unattended and
unused for long periods, unplug it from the wall outlet.
Power lines. An outside antenna system should not be located near overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them
might be fatal.
Servicing. Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Contact your local office
for servicing information.
Important safety instructions • Page 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb260-110Sb260-140

Table of Contents