Advertisement
INSTALLATION DIAGRAM
Wall Mount
DISCLAIMERS
1.
This product must be installed and used as per these instructions.
2.
This product contains no serviceable parts and no attempt should be made to repair this
product. If the product is faulty it should be recycled.
3.
This product is not suitable for installation in hazardous and/or corrosive areas.
4.
Electrical installations periodically receive transient over voltages. This product has been
designed to minimise the effect of such voltages on connected equipment. It may not give
full protection for extreme over-voltage transients such as those resulting from a close
lighting strike.
5.
This product has been designed to operate in ambient temperatures: -10°C to 45°C.
6.
Teknik reserves the right to modify the specification of this product at any time.
5/26-34 Dunning Ave, Rosebery NSW 2018 | 1300 313 780 | +info@tekniklighting.com.au
www.tekniklighting.com.au
Fasten by Screw
Adjustable angle up to 90°
Advertisement
