Advertisement
INTRODUCTION
Thank you for selecting the [SENTRY] LED Flood Light. Please ensure that luminaire is installed in
accordance with the below instructions. TEKNIK assumes no responsibility for inappropriate use
or installation of the product, including any associated damage caused.
5 year warranty
\
Innovative installation method
\
Longer life (LM80 test data)
\
Flex and plug for simple installation
\
PRECAUTION
1.
Read the entire manual carefully before
installation and operation.
2.
The "Warranty Period" is 5 years from
date of purchase. Teknik will replace or
repair the product if it fails or becomes
defective under normal use or due to a
manufacturin defect within the prescribed
warranty period.
3.
Declared lumen output is based upon
measurements obtained during operation
on the appointed LED Electronic Driver
under standardised laboratory conditions.
4.
Installation must be performed by a
licenced and qualified electrician.
5.
Instant restart is allowed.
Reduced heat output
\
Zero Mercury, Ultraviolet or infra-red
\
High CRI
\
Wide beam angle, ideal for commercial
\
environments
6.
Use solid copper wire of 18 AWG
(minimum) for the input terminal
extension, and 20 AWG (minimum) for the
output terminal extension.
7.
Under no circumstance should any
changes be made to any internal electric
circuits connectors or cables for any
reasons.
8.
Under no circumstance should any
physical objects of any nature be inserted
into the LED product as this may cause
electric shock, malfunction, or damage of
the products.
9.
When the LED light is in operation, the
heat sink body temperature may rise to
60° C.
10. Before replacement of luminaire, turn
the power off and allow the lamp to cool
down.
Advertisement
