Connecting An Ipod; Listening To An External Audio Source - Pioneer AS-LX70 Operating Instructions Manual

08 Other connections

Connecting an iPod

You can use the iPod jack on the display unit to playback
music from an iPod. All operations can be carried out via
the iPod. Use the supplied iPod cable to connect an iPod
to this unit.
• When you connect an iPod, this unit's input
automatically switches to iPod.
• Certain iPod models have connectors that are not
compatible with this unit.
R
iPod
iPod
Music >
Extras >
Settings >
Shuffle Songs
Backlight
MENU
®
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
34
En
Display unit
DISPLAY UNIT
iPod MCACC
SYSTEM
F.AUDIO
SETUP MIC
iPod
iPod cable

Listening to an external audio source

To listen to audio from a connected external component
on this unit, choose its input function on the remote
control. Some Pioneer products can be controlled via this
remote.
1 If the system isn't already on, press
to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Select an audio input source.
LINE
Input sources are cycled through as shown below:
Digital 1 Digital 2
Front Audio In
The LCD screen changes to that of the selected input
source.
3 Press the button for the appropriate connected
component.
When a connected component is not displayed on the
screen, or when you have connected a component not
manufactured by Pioneer, press RCV button to put the
remote control on the receiver subwoofer operation
screen.
4 If necessary, start playback of the external source.
RECEIVER
Analog
iPod