2-3.
CASE, INNER
Note on mounting the switches
1. Mount each switch, meeting its bosses
with respective guides.
2. Mount each switch to original position,
as its shape is different each other.
NOTE ON MOUNTING THE RUBBER FOOT
4 thirty-one
switches
5 cover, LCD
1 Pull the knob
of rubber foot.
– 22 –
2 two screws
(P2 × 4)
3 jog board
1 key, rubber
6 escutcheon, jog
7 Pull out the inner case.
2 After mounting, cut off
the knob of rubber foot.