Sending Faxes Manually; Documents You Can Send - Panasonic KX-FPC91 Operating Instructions Manual

Sending faxes manually

1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 10 sheets) FACE
DOWN until a beep tone is heard.
Display:
4
Press
RESOLUTION
desired setting, if necessary.
5
Press MONITOR
6
Dial the fax number.
If you misdial, hang up and dial again.
7
When a fax tone is heard, press
and hang up the handset, if using it.
Note:
If the other party answers your call, ask them to start
receiving a fax, then press your

Documents you can send

Minimum size
128 mm
(5")
Note:
Remove clips, staples or other similar fastening objects.
Check that ink, paste or correction fluid has dried.
Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
18
STANDARD
repeatedly to select the
or lift the handset.
TEL=
FAX START
CONNECTING
FAX START
Maximum size
216 mm
1
(8 / ")
2
Document guides
Handset
MONITOR
,
To stop transmission
Press
To eject the document, press
.
Effective scanning area
Scanned
area
4 mm
3
208 mm (8 / ")
16
Paper width
1
216 mm (8 / ")
2
STOP
Display
FAX START
RESOLUTION
.
STOP
Document weight
Single sheet:
45 /m to 90
2
g
(12 lb. to 24 lb.)
Multiple sheets:
60 /m 2 to 75
g
(16 lb. to 20 lb.)
again.
STOP
/m
2
g
/m 2
g