Smart Wizard Faqs; Connecting To Http://Www.mywifiext.net - NETGEAR EX6200 User Manual

Smart Wizard FAQs

1. When I connect to the network, Smart Wizard keeps asking me for my passphrase, and
I am sure I entered the correct passphrase. What can I do?
It is very likely that the extender is placed at the borderline of the range covered by the
router. See Positioning Your Extender
2. I got an error message in the Review Settings screen in the Smart Wizard. What should I
do?
Make sure that your computer is connected to the extender by using the SSID and the
passphrase that you have just set up, and clicking the Refresh button in your browser.
This will return you to the Smart Wizard.
3. I connected to NETGEAR_EXT and launched a browser, but I cannot see the Smart Wizard.
Why not?
First, make sure that your computer is set up to use DHCP. Second, make sure the
Wireless Device to Extender LED is green. Finally, relaunch the browser and enter
www.mywifiext.net. Check to make sure that your computer has an IP address in the IP
Address screen (see

Connecting to http://www.mywifiext.net

If you have trouble connecting, try to locate the source of the problem:
• For help with passwords, see
• If your browser displays an error page, make sure that you include http:// when you type
this URL in the address field of your Internet browser. If you leave it out, you might not be
able to connect.
• The extender LEDs can help you tell if the extender is correctly set up and working as it
should.
- The best performance is delivered when Link Rate LED
Extender LED
- A workable performance is delivered when the Link Rate LED is amber and the
Device to Extender LED is green.
If you cannot get a wireless connection working, you can use an Ethernet cable to
connect your computer to the extender. See
Ethernet Cable
High Power WiFi Extender EX6200
Extender IP Address Setup
Log In to the Extender
are green.
on page 9.
Troubleshooting
on page 8.
on page 19).
on page 9.
Connect a Computer to the Extender with an
28
or and the Device to