Pioneer DVR-550HX-S Operating Instructions Manual page 124

The Initial Setup menu
16
Setting
Channel Options
Auto Skip
Signal Check
Aerial Power
• If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly,
or it may be shorted. In either case, check the connection and try making the setting again.
D.TV Language
124
En
Options Explanation
Next Screen From this screen you can skip or lock channels.
Locked channels will require the correct password to
be entered before the channel can be watched. Use
the
and press ENTER to toggle the preference.
To enter this screen, input the parental lock password
when prompted (if one has not yet been set then the
password you enter becomes the parental lock
password).
Off •
No channels are automatically skipped.
Radio
Radio channels are skipped when selecting
channels.
Data Data channels are skipped when selecting channels.
Radio & Data
Radio and data channels are skipped when selecting
channels.
Next Screen
Use this screen to check the signal level and quality
of digital channels. Use the
the RF channel; select Add New Channels then
press ENTER to scan for new channels; press HOME
MENU to exit.
On Power is supplied to the connected aerial (antenna)
when this recorder is on or in standby.
Auto
Power is supplied to the connected aerial (antenna)
only when this recorder is on.
Off • This recorder does not supply power to the
connected aerial (antenna).
Next Screen
From this screen you can set your Primary and
Secondary Audio preference for multilingual digital
broadcasts, your Primary and Secondary Subtitle
preference for programmes that are broadcast with
subtitles, and your Teletext language preference. Use
the
buttons to highlight a preference box
buttons to highlight a field then use the
buttons to change it.
buttons to change