Connecting An External Decoder Box (2) - Pioneer DVR-550HX-S Operating Instructions Manual

Connections
• It is not possible to watch one TV
programme and record another using
this setup.
1
Antenna/cable TV
wall outlet
To antenna input
From SCART AV VCR/Satellite receiver
/Cable box
connector
3
AV2 (INPUT 1/
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
G-LINK IN
OUTPUT
OUT
CONTROL
Y P B P R
AV 1 (RGB) – TV
COMPONENT VIDEO OUT
AV1 (RGB) - TV
TV
1 Connect the cable from the antenna/
cable TV outlet to the antenna input on
your VCR/satellite receiver/cable box.
2 Use a SCART cable (not supplied) to
connect your decoder to your VCR/
satellite receiver/cable box.
See the manual for your decoder box for
more detailed instructions.
3 Use a SCART cable to connect your
VCR/satellite receiver/cable box to the
AV2 (INPUT 1/DECODER) AV connector
on this recorder.
4 Use a SCART cable to connect the AV1
(RGB)-TV AV connector to your TV.
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 127).
• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual
CH Setting on page 125).
SCART AV
connection
2
Decoder
DECODER)
DIGITAL
AUDIO OUT
AC IN
COAXIAL
HDMI OUT
ANTENNA(DIGITAL)
OUT IN
5 V 30 mA
4
To SCART AV
connector
Connecting an external
decoder box (2)
If you only have a decoder, connect it to this
recorder and your TV as shown on this
1
page.
Using the setup on this page you can:
• Record scrambled channels received
using the recorder's built-in analog TV
tuner.
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
Decoder
AV2 (INPUT 1/
DECODER)
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
G-LINK
IN
OUTPUT
OUT
Y P P CONTROL
B R
AV 1 (RGB) – TV
COMPONENT VIDEO OUT
AV1 (RGB) - TV
TV
1 Connect your TV antenna to the
recorder and TV.
See Connecting a TV antenna on page 15 for
details.
From SCART AV
connector
3
DIGITAL
AUDIO OUT
AC IN
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
OUT IN
5 V 30 mA
2
To SCART AV
connector
02
19
En