The Shoulder Rest - Yamaha SILENT Violin YSV104 Owner's Manual


Winding the strings
(Please refer to this section when changing the strings)
1
Before you string the instrument, set all adjusters so that
they are in the middle of its adjustment range.
2
Place the ball (on the end of the string) in the notch on the
adjuster, making sure the ball is properly inserted in the notch.
CAUTION
Do not use loop end E strings. It may damage the strings or fine tuner, and can cause injury.
3
After threading the string through the hole in the tuning peg, turn the tuning peg making one
wrap on one side of the hole and the remaining wraps on the other side as shown in the
diagram below.
Winding the 3rd and
4th strings
Remaining
winds
A commercially available violin shoulder rest
(4/4 size) can be attached to the instrument.
* Some shoulder rests may not be compatible
(air cushion type, etc.).
3rd string
(D)
1st
4th string
wind
(G)

The Shoulder Rest

String Adjuster notch
Ball
2nd string
Winding the 1st and
(A)
1st string
1st
(E)
wind
Shoulder rest
The adjusters
should be set to
the middle of
the adjustment
range.
2nd strings
Remaining
winds
13
EN