Customer Programmable Features - Uconnect 4C/4C Nav Settings - Jeep grand cherokee 2018 Owner's Manual

530 MULTIMEDIA
Customer Programmable Features — Uconnect
4C/4C NAV Settings
Press the "Apps " button, then press the "Settings"
button on the touchscreen to display the menu setting
screen. In this mode the Uconnect system allows you to
access programmable features that may be equipped
such as Display, Units, Voice, Clock, Safety & Driving
Assistance, Lights, Doors & Locks, Auto-On Comfort,
Engine Off Options, Audio, Phone/Bluetooth, SiriusXM
Setup, Restore Settings, Clear Personal Data, and Sys-
tem Information.
NOTE: Depending on the vehicles options, feature settings
may vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
Setting Name
Display Mode
Display Brightness With
Headlights ON
NOTE:
To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and the interior
dimmer switch must not be in the party or parade positions.
mode, press and release the preferred setting "option" until
a check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the "Back" Arrow button on the touchscreen to
return to the previous menu, or press the "X" button on the
touchscreen to close out of the settings screen. Pressing the
"Up" or "Down" Arrow button on the right side of the
screen will allow you to toggle up or down through the
available settings.
Display
After pressing the "Display" button on the touchscreen, the
following settings will be available:
Selectable Options
Manual
+
Auto
-