Web-Based Configuration - D-Link DWL-G810 Quick Installation Manual

Connecting the DWL-G810 in Ad-Hoc
Mode

Web-based Configuration

Before You Begin the Configuration
It is best to use a computer (with an Ethernet adapter) that is connected to a switch
for configuring the DWL-G810. (Note: You may also connect the DWL-G810 directly
to the computer that will be used for configuring the unit). The default IP address for
the DWL-G810 is
to assign your computer a static IP address within the same range as the IP address
of the DWL-G810 for the purpose of configuring the DWL-G810. See the Appendix if
you need assistance in assigning a static IP address for your network adapter.
Open your Web browser and
type "http://192.168.0.30"
the URL address box. Then
press the Enter or Return key.
Setup #2
192.168.0.30 with a Subnet Mask of 255.255.255.0. You will need
into
4