Video Output Settings; Tv Screen; Av Connector Out - Pioneer VRD1160-A Operating Instructions Manual

The Initial Settings Menu
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if
you're unsure whether it is MPEG audio
compatible.

Video Output settings

TV Screen

• Default setting: 16:9 (Wide)
Initial Settings
Digital Audio Out
TV Screen
Video Output

AV Connector Out

Language
S-Video Out
Display
Still Picture
Options
Speakers
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
If you have a conventional TV, select either
4:3 (Letter Box) or 4:3 (Pan & Scan). In
Letter Box mode, widescreen software is
shown with black bars at the top and bottom
of the screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you're actually seeing
less of the picture). See also page 65.
AV Connector Out
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
• Default setting: Video
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
and reconnect to the TV using either the
supplied video cable, or an S-video cable
(see pages 11 and 12 for more on this).
• SCART cables come in various configu-
rations. Make sure you use the correct
one for your TV/monitor. See page 74 for
the SCART pin assignment diagram
Initial Settings
Digital Audio Out
TV Screen
Video Output
AV Connector Out
Language
S-Video Out
Display
Still Picture
Options
Speakers
• Video – Compatible with all TVs, but
lowest quality of the three AV settings.
• S-video – Almost the same quality as
RGB, but can give better results if you
are using a long SCART cable.
• RGB – If your TV is compatible, this
setting gives the best picture quality.
• When the AV connector is set to output
RGB video, the component video output
is switched off. If you want to use the
component video output, set the AV
connnector to Video or S-Video.
Video
S-Video
RGB
08
51
En