No.mb662<Rev.003>)1 - JVC NX-F3B Service Manual

STEP Operation
Press a [4] key of the
remote controller
Press a [5] key of the
remote controller
Press a [6] key of the
remote controller
Press a [8] key of the
remote controller
Press a [9] key of the
emote controller
Press a [10] key of the
remote controller
Press a [0] key of the
remote controller
Press a [ 10] key of the
remote controller
Press a [STOP] key of
the main body or remote
controller
Press a [OPEN/CLOSE]
key of the main body or
remote controller
Press a [PLAY] key of
the main body or remote
controller
Press a [MENU] key of
7
the remote controller
Press a [POWER] key of
the main body
*1 Mode toggle done by press [MENU] key.
*2 STEP3 are only for DVD-AUDIO or VR correspondence model.
1-22 (No.MB662<Rev.003>)
Movement
1 2
CD_LD lights and laser
current is displayed
DVD_LD lights and laser
current is displayed
DVD_SL x1 jitter
measurement mode
Content of BACKUP
memory(0x00-0x63)
indication (FWD)
Temperature sensor
(AD value) indication
DVD-DL(parallel,opposite)
Search & jitter
measurement of the
specified position of
DVD-SL
MONITOR output switch
1: SRV_MONI_CIRC
2: SRV_MONI_SERVO
3-5: SRV_MONI
_ANALOG
6-7: SRV_MONI_DRC
8-11: SRV_MONI
_SERVO_JIG
12: SRV_MONI
_DEFAULT
BCA READ CHECK
0:During BCA READ
1:BCA READ OK
2:BCA SEEK ERROR
3:BCA READ ERROR
4:SPINUP adjust ERROR
Disc stop, LD-OFF
C
Tray Open/Close
Disc playback
Back to STEP 2
Release the TEST MODE
FL(LCD)indication
3 4 5 6 7 8 9 10 11 12 13
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : Real measured value
Upper Byte1 : Display option
Upper Byte2 : BACKUP memory address
Lower : Content of BACKUP memory
Upper : 0
Lower : Temperature sensor value
Upper : 0x00-0x06(measure at VT501)
Lower : Jitter value
Upper : 0x00-0x0C
Lower : 0
H E C K
Upper:Laser current value
(BACKUP value, Real measured value)
Lower:Jitter value
Release at each step
Remarks
0x00 : BACKUP area
0xFF : permanent area
(0x00-0x63)