Controls And Displays; Front Panel - Pioneer DV-LX50 Operating Instructions Manual

Chapter 3
03

Controls and displays

Front panel

1
 STANDBY/ON (page 20)
1
Press to switch the player on (the power indicator and indicator in
the middle of the unit light up when the power is on) or into standby.
2 SACD SETUP
Press to select which part of an SACD disc you want to listen to —
stereo audio (2ch Area), multi-channel audio (Multi-ch Area) and,
for hybrid SACDs, standard CD audio(CD Area).
Playback on page 34 for more on this.
The indicator lights when an SACD disc is set and SACD Playback
is set to 2ch Area or Multi-ch Area.
3 PURE AUDIO
When playback is stopped, press to switch off/on the front panel
display and disable the video and digital outputs*. Use this when
you want to hear audio from the analog outputs with no interference
from other signals (when listening to a DVD-Audio disc, for
example). The indicator lights when the Pure Audio feature is
switched on.
This button only functions when Pure Audio Button (page 34) is set
to Available.
*These include HDMI, and the coaxial and optical digital outputs.
4 Display (page 17)
5 Disc tray
16
En
2 3
4
6
The remote control has a range of up to about 7 m.
7
Lights when this player is recognized by another HDMl or DVI/HDCP
compatible component.
8
SACD
See
9
10  (pause) (page 22)
11   and   (page 22)
12  OPEN/CLOSE (page 22)
5 6 7
12 11 10 9
Remote control sensor
HDMI indicator
 (play) (page 22)
 (stop) (page 22)
8