Direct Setting Using A Barcode Reader; Setting Using The Remote Control Unit - Pioneer DVD-V7200 Operating Instructions Manual

BARCODE/COMMAND STACK SETTING
1
2
BC/COMMAND STACK GROUP 001: 001
PLAY
SAVE DEL
Display when the example on the right is input
Barcode/Command Stack Setting
26
<VRB1208>
INS EXIT

DIRECT SETTING USING A BARCODE READER

1. Read a barcode with a barcode reader.
2. Send it to the player.
Example 1) Read "PLAY" and send it.
Example 2) Read "Play Title 8 Chapters 5 to 12 with Subtitle 3, Audio
2 and Angle 1" and send it.
SETTING USING THE REMOTE CONTROL
UNIT
Five commands including Play 3, Pause 8, e Still/Step E and Stop
7 can be set using the remote control unit.
The chapter search, chapter play, frame search and frame segment
play commands can also be set using the remote control unit.
1. Press the button.
÷ The TITLE number will blink and the input mode will be selected.
Example 1) To set "Play"
Press the button.
÷ The Barcode/Command Stack Input screen shows "PLAY" and
increments to the next Input screen.