Video Connections; System Control Connections - Pioneer DV-C603 Operating Instructions Manual

Video Connections

This player features S-video, composite, and component
video output possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General to set whether you are using a wide screen or
standard size TV or monitor (page 19). Additionally, you
can use the [TV Screen] setting in the Setup screen
Video menu (page 30).
S-VIDEO OUT
• Make S-video connections to a TV or monitor with S-
video input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect the S-
VIDEO OUT jack on the player to S-video input on the
TV or monitor.
• When using this jack, be sure to set VIDEO OUT
SELECT to the left position.
COMPONENT
VIDEO OUT S-VIDEO OUT VIDEO OUT VIDEO
OUT
Y P B P R
SELECT
AUDIO OUT
R L
DIGITAL OUT
1
CONTROL
OPT.
2
VIDEO
S-VIDEO OUT
OUT
SELECT
VIDEO OUT
• Make composite video connections to a standard TV
or monitor with a video input jack.
• Use the supplied video cable to connect the VIDEO
OUT jack on the player to the video input on the TV or
monitor.
• Be sure to match the color of the plug with the color
of the jack (yellow).
• When using this jack, be sure to set VIDEO OUT
SELECT to the left position.
COMPONENT
VIDEO OUT S-VIDEO OUT
VIDEO OUT VIDEO
OUT
Y P B P R SELECT
AUDIO OUT
R L
DIGITAL OUT
1
OPT. CONTROL
2
VIDEO
OUT
VIDEO OUT
SELECT
COMPONENT VIDEO OUT
(Interlace/Progressive-scan)
• Make component video connections to a TV or
• Use a component video cable or 3 video cords (not
• If connected to a progressive-scan compatible TV, set
• When making component video connections, make
AC IN
TV or
monitor
S-VIDEO IN
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player's
CONTROL IN jack to the CONTROL OUT jack of
another PIONEER component bearing the Î mark, you
can control the player as though it were a component in
a system (system control).
• If you connect for system control, you cannot operate
• When controlling as a system, be sure to make a
• For details, refer to the operation manuals of the
AC IN
TV or
monitor
VIDEO IN
monitor with component inputs to produce a higher
quality video image.
supplied) to connect the COMPONENT VIDEO OUT
jacks on the player to the component jacks on the
monitor.
the [Component Video] menu to [Progressive] (page
32).
sure to set the VIDEO OUT SELECT switch on the
rear panel of the player to the right to assign
component video output.
COMPONENT
VIDEO OUT S-VIDEO OUT VIDEO OUT
VIDEO
OUT
Y P B P R SELECT
AUDIO OUT
R L
DIGITAL OUT
1
CONTROL
OPT.
2
VIDEO
COMPONENT
OUT
VIDEO OUT
SELECT
Y
P P
B R

System Control Connections

the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
connection to the amplifier using an audio or video
cord, even when using only digital components.
connected components.
COMPONENT
VIDEO OUT S-VIDEO OUT VIDEO OUT
VIDEO
OUT
Y P B P R SELECT
AUDIO OUT
R L
DIGITAL OUT
1
CONTROL
OPT.
2
CONTROL
IN
Pioneer component with Î mark.
AC IN
TV or monitor
COMPONENT
VIDEO IN
Y
P
B
P
R
AC IN
CONTROL
OUT
17