Changing Discs - Pioneer DV-C603 Operating Instructions Manual

Changing discs

You can change any of the discs not in the play position
using the EXCHANGE button. Because the disc in the
play position is unaffected, you can use this button to
change discs even during playback.
Note
If no discs are loaded, the EXCHANGE button has no effect.
D VD PLA YER
STANDBY/ON CD MODE VNR
22
– DVD/Video CD/CD
2
DISC
1 2 3 4 5
7
4 1 ¡ ¢
1
Press EXCHANGE.
The disc tray comes out.
2
Load a disc.
• Load a disc with the label side facing up, using
• If you want to load more discs, press DISC SKIP
2
0
OPEN/CLOSE
DISC SKIP
EXCHANGE
8 3
Notes
• Load discs only in the two fully accessible disc spaces. Do
1, 3
not try and load discs into any of the other spaces; they
may not load correctly and cause the unit to malfunction.
• Do not rotate the disc tray by hand. Always use the DISC
SKIP button.
• Do not obstruct the movement of the disc tray.
3
Press EXCHANGE.
The disc tray goes back in.
Note
Always use the 0 OPEN/CLOSE or EXCHANGE button to
close the disc tray after exchanging discs. Do not push the
disc tray shut.
the disc tray guide to align the disc.
to rotate the disc tray two disc space.
Disc number