Let's Get Started - Pioneer DV-989AVi-S Operating Instructions Manual

Getting Started
• Press to switch the player on or off (the
player can be put into standby using the
remote control; the STANDBY indicator
above the button lights when in standby).
POWER
• When the player is in standby, you can
OPEN/CLOSE and
use the
buttons to switch the player on and open
the disc tray/start playing a loaded disc.
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the correct
video input (not a TV channel). For
example, if you connected this player to
the VIDEO 1 inputs on your TV, switch
your TV to VIDEO 1.
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
• This player features a screen saver. When
on, If the player is stopped or paused and
no button is pressed for five minutes, the
screen saver starts. See Screen Saver on
page 64 for how to switch it on.

Let's Get Started

When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can let
the player know what kind of TV you have,
then either use the Setup Navigator to make
more settings, or jump right in and start
playing some discs.
Before continuing, make sure that you've
loaded the batteries in the remote control.
• If you have connected an HDMI-compat-
ible device, the HDMI settings screen will
appear instead of the setup screens
below. See HDMI Settings on page 68 to
make the necessary settings.
(play)
1 Use the Joystick (up/down) to choose
a language, then press ENTER.
Let's Get Started Menu
SETUP TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ FL JOG
7 3 8
E E/
/
4 ¢ 1 ¡
PLAY MODE SURROUND
Select the display language
using the cursor keys on the remote
English
français
Deutsch
Italiano
Español
Nederlands
Choose one then press Enter
04
29
En