Easy Connections - Pioneer DV-59AVi Operating Instructions Manual

02 Connecting up

Easy connections

TV
AUDIO
OUT
(2ch)
FRONT
L
R
The setup described here is a basic setup that
allows you to play discs using just the cables
supplied with the player. In this setup, stereo
audio is played through your TV.
• This player is equipped with copy protec-
tion technology. Do not connect this
player to your TV via a VCR using AV
cables, as the picture from this player will
not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
1 Connect the VIDEO OUT and AUDIO
OUT (2ch) jacks to a set of A/V inputs on
your TV.
Use the supplied red/white stereo audio and
yellow video cable. Make sure you match up
the left and right audio outputs with their
16
En
AUDIO
OUT
DIGITAL AUDIO
(5.1ch)
OUT
SURROUND
COAXIAL
L CENTER
R SUB
WOOFER
OPTICAL
S400
HDMI OUT
(AUDIO)
A/V IN
1 2
1 2 Y
IN OUT
VIDEO S-VIDEO
CONTROL COMPONENT VIDEO O
OUT OUT
To power outlet
corresponding inputs for correct stereo
sound.
See Using other types of video output below if
you want to use a different type of connection.
• If you need another pair of stereo outputs
(and don't need to use the multichannel
analog outputs), you can use the AUDIO
OUT (5.1ch) FRONT L / R jacks (page 19).
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
• Do not unplug the player from the power
outlet while it is switched on.
• Do not plug this player into a switched
power supply found on some amplifiers
and AV receivers.
AC IN
P
B