Table of Contents
Advertisement
Meet Your Extender
Before you install your extender, familiarize yourself with its LEDs, buttons, and port.
Front Panel LEDs and Right Panel WPS Button
Use the LEDs during installation to find the best location for the extender or to monitor the
extender performance. The following figure shows the extender in upright position, with the
feet attached. (For information about attaching the feet, see
Figure 1. Front panel LEDs and right panel WPS button
The following table describes the LEDs.
Table 1. LEDs
LED
Power LED
N600 WiF Range Extender
Description
•
Solid amber. The extender is booting.
•
Solid green. The extender is powered on.
•
Blinking green. The firmware is corrupt. Visit downloadcenter.netgear.com.
•
Blinking amber. The firmware is upgrading or the Restore Factory
Settings button was pressed.
•
Off. The extender is powered off.
Overview
Attach the Feet
WPS button (on the top)
WPS LED
LAN LEDs (1–4)
Device to Extender LED
5 GHz Link Rate LED
2.4 GHz Link Rate LED
Power LED
6
on page 8.)
Advertisement
Table of Contents
