Table of Contents
Advertisement
›
Receive data using the Bluetooth wireless
feature
1
In Idle mode, open the application list and select
Bluetooth, and then select the check box next to your
→
device.
To select the length of time that your device will be
visible, press [
2
When prompted, enter the PIN for the Bluetooth wireless
feature and select OK. Alternatively, select Accept to
match the PIN between your device and the device.
3
Accept to confirm that you are willing to receive
Select
data from the device.
Received data is saved to the bluetooth folder. If you receive a
contact, it is automatically saved to the phonebook.
Wi-Fi
Learn to use your device's wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses a non-harmonised frequency and is
intended for use in all European countries. The WLAN
can be operated in the EU without restriction indoors,
but cannot be operated outdoors.
Visible time-out.
→
]
Connectivity
97
Settings
Advertisement
Table of Contents
