›
Connect to a Wi-Fi AP using a Wi-Fi Protected
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
1
In Idle mode, open the application list and select
→
Wi-Fi.
2
Select a network indicated as protected network available,
and select the check box next to Show advanced
options.
3
Select the
4
Push button
Select
5
Press a WPS button on the access point within 2 minutes.
To connect to Wi-Fi with a WPS PIN,
1
In Idle mode, open the application list and select
→
Wi-Fi.
2
Select a network indicated as protected network available,
and select the check box next to Show advanced
options.
3
Select the
4
PIN from access point or PIN from this device
Select
Connect.
5
On the access point, press the WPS button or enter the PIN
of your device.
WPS drop-down menu.
→
WPS drop-down menu.
Connect.
Connectivity
99
Settings
Settings
→