Pioneer AVIC-D1 Operation Manual page 25

❒ If the selected street is very long, and
passes through several cities or area, the
screen for entering the name of the city or
area appears.
If you did not input the house number in Step 5,
the house number input screen comes up after
the "Street" and "City" are determined. You
should now input the house number (perform
Step 5).
❒ If there is more than one place for the house
number input, or if there is no such house
number in that place, a range of house num-
bers are displayed. To start the route calcula-
tion, touch the range within the list you wish
to specify as the destination.
❒ You can also see the destination on the
map by touching the
list.
➲ Searching the destination by map ➞
Page 33
❒ If you press the MAP button during route
calculation, the calculation is canceled
and the map display appears.
❒ When performing a destination search
with the route already set, select whether
to regard the specified area as your desti-
nation and search for a new route, or
search for a route via that area.
➲ Adding way points to the route ➞ Page 41
➲ Once searched for, the location is auto-
matically stored in the "Destination His-
tory". ➞ Page 48
10
Drive in accordance with the screen and
voice information.
Your Navigation System gives you the follow-
ing information with the timing adjusted to
the speed of your vehicle:
• Distance to the next turning point
• Direction of travel
• Road number of the freeway
• Way point (If this is set)
• Your destination
➲ How to view the screen ➞ Page 29
➲ Searching for another route ➞ Page 40
➲ Canceling route guidance ➞ Page 38
❒ Touching the
❒ If you deviate from the route with the Guid-
❒ If you stop at a gas station or a restaurant dur-
❒ If a traffic congestion or closure occurs on the
to the right of the
➲ Traffic information ➞ Page 50
How to view Map View screen
This section describes only the items that are dis-
played on the Map View screen.
➲ Details of the map screen ➞ Page 29
(1) Current location
(2) Distance to the destination
(3) Estimated time of arrival (or travel time to
your destination)
allows you to hear the
information again.
ance set to Route View or Guide View and
enter a street not recorded on the disc, the
screen changes to Map View. When you
return to the route, returns to the original view
and resumes route guidance.
ing the route guidance, your Navigation Sys-
tem remembers your destination and route
Information. When you start the engine and
get back on the road, the route guidance
resumes.
set route ahead, traffic information will appear
on the screen and voice information will be
provided. At that time, select whether to recal-
culate for a new route or stay on the current
route.
(2) (3) (1)
23