Chauvet DJ Bank Quick Reference Manual page 3

DJ Bank QRG
Product
Description
Overview
AC Power
Power Linking
Fuse
Replacement
The DJ Bank is a compact strip light with sound-active mode and fully
automatic programs; it includes an all-on and chase switch.
Sound-Sensitivity Adjustment Knob
Mounting Bracket
This product has an auto-ranging power supply that works with a voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
You can link up to 30 DJ Bank units at 120 VAC, or 50 units at 230 VAC.
To replace the fuse in the DJ Bank:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Speed Adjustment Knob
3
All On/Chase Switch
Fuse Holder
Power In/Out
EN