Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips BTM2560 User Manual

7 Other features

Set the alarm timer

This product can be used as an alarm
clock. You can select the disc, radio, or
.mp3 files on a USB storage device as
alarm source.
Note
•
Alarm timer is not available in AUDIO IN
mode.
•
If CD/USB source is selected, but no disc is
placed or no USB device is connected, the
radio source is selected automatically.
1
Make sure that you have set the
clock.
2
In standby, press and hold
seconds.
» The hour digits blink.
3
Press /
hour, and then press
to confirm.
» The minute digits blink.
4
Press /
and then press
confirm.
» The last selected alarm source
blinks.
5
Press /
source (disc, USB or FM radio),
and then press
confirm.
» XX blinks (XX indicates the
volume level of alarm).
6
Press /
volume, and then press
EN
14
for more than 2
repeatedly to set the
to set the minute,
to select an alarm
to set the alarm
to confirm.
Activate/deactivate alarm timer
In standby mode, press
repeatedly to activate or deactivate
timer.
» If timer is activated,
•
In standby, you may press and hold
or off.

Set the sleep timer

This music system can switch to
standby automatically after a set period
of time.
•
When the music system is turned
on, press
to select a set period of time (in
minutes).
» When sleep timer is activated,
To deactivate sleep timer
•
Press
until
» When sleep timer is deactivated,
Listen to an external
to
device
You can listen to an external device
through this unit with an MP3 link cable.
1
Connect an MP3 link cable (not
supplied) between:
to
•
•
2
Press
AUDIO IN source.
3
Start to play the device (see the
device user manual).
to toggle clock display on
is displayed.
(sleep off) is displayed.
disappears.
jack (3.5 mm) on the
product,
and the headphone jack on an
external device.
repeatedly to select
is displayed.
repeatedly
repeatedly