JVC RX-DV31SL Service Manual page 2

Amplifier Output Power
Audio Audio Input Sensitivity/
Impedance (1 kHz)
Audio Input (DIGITAL IN)*
Signal-to-Noise Ratio
('66 IHF/'78 IHF)
Frequency Response (8 Ω)
Tone Control
Video Video Input
Sensitivity/
Impedance
(1 kHz)
Video Output
Level/Impedance
(1 kHz)
FM tuner Tuning Range
(IHF)
AM tuner Tuning Range
General Power
Requirements
Power
Consumption
Dimensions
(W × H × D)
Mass
1-2 (No.22023)
SPECIFICATION
At Stereo operation
At Surround operation Front channels
TV, TAPE/CDR, DBS, VCR
Coaxial
Optical
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency-32 kHz, 44.1 kHz, 48 kHz).
TV, TAPE/CDR, DBS, VCR
TV, TAPE/CDR, DBS, VCR
Bass (100 Hz)
Treble (10 kHz)
Composite DBS IN, VCR IN
video
S-video DBS IN, VCR IN
Composite VCR OUT, MONITOR OUT
video
S-video VCR OUT, MONITOR
OUT
Component DVD COMPONENT
video VIDEO OUT
Color System NTSC
Horizontal 500 lines
Resolution
Signal-to- 63 dB
Noise Ratio
(S/N)
Synchronize Negative
87.5 MHz to 108.0 MHz
530 kHz to 1 710 kHz
AC 120 V , 60 Hz
200 W/255 VA (in operation)
2 W (in standby mode)
435 mm × 100 mm × 403.5 mm
(17 3/16 in. × 3 15/16 in. × 15 15/16 in.)
8.4 kg (18.5 lbs)
Front channels 100 W per channel, min. RMS, driven into
8 Ω, 40 Hz to 20 kHz with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into
8 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz,
Center channel
with no more than 0.8% total harmonic
distortion.
Surround channels 100 W per channel, min. RMS, driven into
8 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
240 mV/47 kΩ
0.5 V(p-p)/75 Ω
DIGITAL 1 (DBS)
DIGITAL 2 (TV) -21 dBm to -15 dBm (660 nm ±30 nm)
87 dB/67 dB
20 Hz to 20 kHz (±1 dB)
±10 dB ±2 dB
±10 dB ±2 dB
1 V(p-p)/75 Ω
(Y:luminance) 1 V(p-p)/75Ω
0.286 V(p-p)/75 Ω
(C:chrominance)
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
(Y:luminance)
0.286 V(p-p)/75 Ω
(C:chrominance)
1.0 V(p-p)/75 Ω
(Component-Y)
(Component-PB/PR) 0.7 V(p-p)/75 Ω