Advertisement
l
If your machine has a slide Load Size Selec-
tor, you may set the load size anywhere on or
between the small and ex large settings.
To change the load size setting after the washer
has started to fill, move the Selector to the
desired new setting.
NOTE: If your washer has RESET on the Load
Size Selector, change the load size selection by
first moving the Selector to RESET, then to the
new load size.
Load size tips
l
Items should move freely in the washer. Do
not overload the machine or select a load size
that is too small for the wash load.
l
Use a large load size setting for best results
with permanent press clothes.
l
Reduce wash time when using a small load
size setting. Loads with only a few small
items need less wash time.
Selecting
wash-rinse
temperatures
Your washer has a CLEAN TOUCH- or
push button Water Temperature Selector. Match
the water temperature to the type of fabric and
soils being washed. The top temperature is the
wash water and the bottom temperature is the
rinse water.
NOTE: The Regular cycle features all cold
rinses.
Push button selector
See the "Water usage guide" on page 16 for
more information.
CLEAN TOUCH selector-
an indicator
appears
above the water tempera-
tures selected
Selecting
a cycle
and time
6
Advertisement
