Advertisement
Operating
Your Washer
In This Section
Paw
Retore starting
your washer . . . . . . - .-..-.
- . . . . . 5
Starting
or stopping
your washer
-...--....A
Selecting
a load
l
lza l....-lll.-...ll--l
5
Selecting
wash-rinse
temperatures
-..-.......6
Paw
Selecting
a cycle and time ".." . . ..-......-.-.6
Uolng rinse and spin,,,--.-......
..-. -..-9
Using drain and spin .-...-.
-.---....---9
What happens
In each cycle ---
. . . . . . ..-.....9
Operating your washer properly ensures maximum washing efficiency. This section gives you
important information to help you to select
a
cycle, time, and temperature for your wash load.
Before
starting
your washer
Add measured detergent. Then place a sorted
NOTE: If your washer has a Consumer
load in the washer before starting. See page 12
Features Guide, remove it and place it in your
for additional "Before you wash" information.
Use and Care Guide.
Starting
or stopping
your washer
Starting your washer:
1. Select a load size and water temperature.
2. Push in and turn the Cycle Control Knob
clockwise. Stop when the indicator on the
knob's outer ring points to the number in the
wash cycle you want. The numbers are
minutes of wash time.
3. Pull out the Cycle Control Knob.
Refer to pages 6-9 for additional information to
help you make selections.
Stopping and restartlng your washer:
*To stop the washer at any time, push in the
Cycle Control Knob.
*To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Cycles
may vary with model
Settings
may vary with model
5
Advertisement
