Table of Contents
Advertisement
2. Connect the USB cable to the charging head.
3. Plug the charging head into a standard AC power
outlet. The device turns on with the screen locked and
indicates both its charge state and percent of charge.
Warning! While the device is charging, if the touch screen
does not function due to an unstable power supply
unplug the USB power adapter from the power outlet
or unplug the USB cable from the device.
12
Incorrect
4. When charging is finished, first unplug the charger's
power plug from the AC wall outlet, then disconnect
the USB cable connector from the device.
Important! If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger or a non-metallic
stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage
the tempered glass surface and void the warranty.
For more information, refer to "Standard Limited
Warranty" on page 176.
Installing a Memory Card
Your device lets you install a microSD (SD) or microSDHC
memory card to expand available memory to store images,
videos, music, applications, and data.
1. Open the microSD cover (on the lower left side of the
phone).
2. With the gold contacts facing down, carefully slide the
Memory card into the slot (as shown), pushing gently
until it clicks into place.
3. Close the microSD cover.
Advertisement
Table of Contents
