This connector is located on the side of the unit.
Note: All switches are electronic (solid state) not mechanical relays.
SAMLEX AMERICA BATTERY
REMOTE CONTROL OPTION
A remote control panel may be connected to the con-
verter using a 9-pin D-connector, which attaches to
the side of the converter. The remote control panel
and D connector are part of the remote control option.
The remote control panel allows the unit to be oper-
ated remotely as well as duplicating all the diagnostic
indicators and audible alarm.
REMOTE CONNECTOR
DRY CONTACT
ALARM RELAY
DRY CONTACT
ALARM RELAY
REMOTE OFF
CONNECT TO 5 TO FORCE
UNIT TO OFF
OVER TEMP
NORMALLY HIGH (+12V)
GOES LOW ON
OVER TEMPERATURE
LOW INPUT
NORMALLY HIGH (+12V)
GOES LOW WHEN
INPUT GOES LOW
OVERLOAD
NORMALLY HIGH (+12V)
GOES LOW WHEN
UNIT OVERLOADED
LOW OUTPUT
NORMALLY HIGH (+12V)
GOES LOW WHEN
OUTPUT GOES
LOW
+12 VDC
GROUND
COMMON FOR SWITCHES
REFERENCE VOLTAGE
FOR REMOTE OFF
1
6
2
7
3
8
4
9
5
CAR BATTERIES