Connecting The Speaker - Inateck BP2003 Instruction Manual

Connecting the speaker

Wireless/Bluetooth
1. Press and hold the Power button
When you hear a voice indication that the device is ready
for pairing; the LED light will blink blue at the same time.
2. Turn on the Bluetooth function on your device, detect new
Bluetooth devices. Upon device find Inateck BP2003, click
the device name and pair with it.
3. If paring code is requested, please enter "0000"and confirm
it.
4. After successful pairing, you will hear a voice indication and
the LED lights blue.
5 . Au t om a tic Bl u et oo t h con nect i on: The Bluetooth
connection between speaker and another device will be
disrupted if they are beyond the valid distance. However,
it can be automatically re-built when two devices recover
the valid distance within 10 minutes.
Wired
1. Power on your speaker.
2. Connect the 3.5mm audio cable to the AUX port and
connect the other end of the cable to the audio port of
your mobile phone, computer or other compatible devices.
The LED lights green at the same time.
Note:
a. Device with higher Bluetooth version can connect with the
speaker prior to other Bluetooth devices in the queue.
b. The Bluetooth speaker automatically memorizes the last
device it connects with. Therefore, if you need to connect
it to another device, press and hold the
to interrupt current Bluetooth connection and follow the
previous steps to reconnect it to another device.
c. Speaker will power off automatically if no Bluetooth pairing
is made within 10 minutes.
d. The speaker is equipped with Bluetooth version 4.2. As
a result, it may not pair with your laptop or tablet whose
Bluetooth is older than Bluetooth 4.2. Insert the 3.5mm
audio cable into the AUX port if this occurs.
for three seconds.
for 3 seconds
2