Excell PWH3 User Manual page 40

EXCELL PRECISION CO., LTD
 Command Mode
Command Format A
Host Command
Slave
MZ Zero
MT Tare
MG Gross weight
MN Net weight
CT Clear TARE value
SC Continuous transmission
SA Auto transmission
% Stop continuous transmission and enter the command mode
Note: UA ~ UF settings are depended on the model of the scale
Command Format B
Host Command
Slave
RW Read current weight
RG Read Gross weight
RN Read Net weight
RT Read TARE
Read current display of
RB
weight (simple)
Note: a. add % before the command to read continuously
b. add # before the command to transmit a stable value
RJ,RK,RL Command Description
If RL command entered, and
if weight is higher than HI (FNC 03 setting), and if the current weight is 10 kg, the following
will be displayed: "100+ 10.000"
If weight is higher than HI (FNC 03 setting), and if the current weight is 0.5 kg, the
following will be displayed: "001+ 0.500"
If weight is between HI and LOW, and if the current weight is 1 kg, the following will be
displayed: 010+ 1.000
02005159
Command
SO Command mode
UA Switch to the first unit
UB Switch to the second unit
UC Switch to the third unit
UD Switch to the forth unit
UE Switch to the fifth unit
UF Switch to the sixth unit
Data
RH Read Gross (simple)
RI Read Net (simple)
Read comparison situation +
RJ current display of weight
(simple)
Read comparison situation +
RK
Gross (simple)
Read comparison situation +
RL
Net (simple)
39 ZSME300000225