Interfaces; Fig. 2 : Physical Layout Of The Smt340/360/380 - PC Pelser SMT340 User Manual

6. INTERFACES

Rev01, Issue01
Ji8
Ji7
Ji5
Ji6
LEDS
PD2
PD1
D1
Note : On the SMT380-02 PCB the TIM-site is
rotated through 180 Degrees

Fig. 2 : Physical Layout of the SMT340/360/380

Fig. 2 Shows the Physical Layout of the SMT340/360/380, indicating the external connectors with their
location and numbering. Connector definitions are as follows:
Ji1 : External clock input via 50ohm CV10 coax connector.
Ji2 : External clock input via 50ohm MMBX coax connector.
Ji3 : External enable/trigger input via 50ohm CV10 coax connector.
Ji4 : External enable/trigger input via 50ohm MMBX coax connector.
Ji5 : Channel A analogue input via 50ohm CV10 coax connector.
Ji6 : Channel A analogue input via 50ohm MMBX coax connector.
Ji7 : Channel B analogue input via 50ohm CV10 coax connector.
Ji8 : Channel B analogue input via 50ohm MMBX coax connector.
Document Name: SMT340_360_380_User_Manual_Rev01_Iss01.doc
Document Number: TBD
Author: PC Pelser / MR Vogel
Document Title: SMT340/360/380 User Manual
Shielded ADCs
Ji3
Ji4
Ji1 Ji2
Preliminary
S2
LEDS
S1
SMT340_60_80_PCB_Layout_Rev01_Iss01.vsd
Revision: 01
Original Date: 25 June 2001
Revision Date: 25 June 2001
Page 10 of 28