Advertisement
Smart flight mode options
You can select Follow Me / Follow Snap at the right side of the XIRO App preview screen.
Follow Snap
In the Follow Snap mode, you can select an object or person on the preview screen in the XIRO App by
drawing a square around your target. When the target is correctly selected, the red rectangle becomes
green. Next press Follow and the Xplorer Mini will track the object and you can start recording or shooting
pictures.
Make sure there are no tall buildings or obstacles between the drone and the target.
In the Follow Snap mode, when the drone loses connection, please exit Follow Snap by switching to other
modes.
Ground
Follow Snap
Follow Me
Follow Me
In the Follow Me mode, you have two different options: Self-Circling and the Follow mode.
1. In the Self-Circling mode, the front of the Xplorer will face the connected mobile device and take a 360°
picture based on the position of the mobile device. Press Self-Circling again to exit the Self-Circling mode.
In the Follow Me flight mode, you can select either the Self-Circling function or the Follow function. It is
not possible to select both options simultaneously.
Make sure the Xplorer can target the object with the mobile device successfully. When the front of the
drone is not facing the object, targeting is not possible. You have to exit the Follow Me mode, reposition
the Xplorer and restart the Follow Me mode.
Make sure the Xplorer can target the object with the mobile device successfully. When the front of the
drone is not facing the object, targeting is not possible. You have to exit the Follow Me mode, reposition
the Xplorer and restart the Follow Me mode.
Advertisement
