Datalogic Gryphon GM410X Quick Reference Manual page 15

General purpose handheld linear imager barcode reader with datalogic’s star cordless system

Hide thumbs Also See for Gryphon GM410X:

Table of Contents

Configure the Base Station

Host Connection —

Verify before connection that the

reader's cable type is compatible with your host equip-

ment. Most connections plug directly into the host device

as shown in Figure 4 on page 7. Keyboard Wedge interface

cables have a 'Y' connection where its female end mates

with the male end of the cable from the keyboard and the

remaining end at the keyboard port on the terminal/PC.

Figure 4. Connecting to the Host

or...

Power Connection —

Plug the AC Adapter in to an approved

AC wall socket with the cable facing downwards (as

shown in Figure 1) to prevent undue strain on the socket.

Disconnecting the Cable —

To detach the cable, insert a

paper clip or similar object into the hole on the base, as

shown in Figure 5.

Figure 5. Disconnecting the Cable

Insert

Paper Clip

Quick Reference Guide

Table of Contents