Advertisement
1. Connect the Router/Gateway to a Broadband connection, (e.g., a Cable modem or a DSL modem.)
2. Connect the 802.11b Access Point (WAP-B11) to the router.
3. Install the WUS-B12 Wireless USB Adapter into a laptop computer on your wireless network.
4. Check the Device Manager to confirm that the wireless adapter is installed correctly. Please refer to the
Networking Basics section in this manual entitled: Checking the Installation of the Drivers for the
Wireless Adapter.
5. By default, the wireless adapter is set to obtain a Dynamic IP Address. If you are having difficulty
connecting, check to make sure that the IP Address of the wireless adapter is within the IP address
range of your network. Please refer to the Networking Basics section in this manual entitled: Checking
The IP Address.
6. Learn to share printers and files. Please refer to the Networking Basics section in this manual entitled:
Adding and Sharing Printers in Windows XP.
2. A Home Internet Network with Multiple IP Addresses
(Network administrators with Static IPs can also follow these instructions.)
If you have two or more computers (laptops or desktops) and want to share files, printers, and Internet access
using multiple IP addresses that you have purchased from your Internet Service Provider
connect to an Ethernet network that uses Static IP Addresses, then follow the instructions on the next page.
When you have completed your network, it should look similar to this:
2. A Home Internet Network with Multiple IP Addresses (continued)
Please note that this type of installation requires that your ISP (Internet Service Provider) provides you a static IP
address for each computer and the Access Point on your network. Please refer to the manual that came with
your Access Point to determine its configuration.
Please follow these steps to complete the installation:
1. Connect the Wireless Access Point to a Broadband connection (i.e., a Cable modem.)
2. Install the WUS-B12 Wireless USB Adapter into the laptop computer(s) on your wireless network.
3. Check the Device Manager to confirm that the wireless adapter is installed correctly. Please refer to
the Networking Basics section in this manual entitled: Checking the Installation of the Drivers for the
Wireless Adapter.
-or-
you want to
Advertisement
