Wolf ICBCT15I/S Installation Instructions Manual page 17

I N S TA L L AT I O N I N S T R U C T I O N S
E L E C T R I C A L R E Q U I R E M E N T S
This appliance must be installed in accordance
with local codes. The correct voltage,
frequency and amperage must be supplied to
the appliance from a dedicated, grounded
circuit which is protected by a properly sized
circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are
listed on the product rating plate, located on
the underside of the cooktop.
The cooktop is provided with a terminal box.
Refer to the wiring diagram below.
N
L1
GROUND
Single phase wiring diagram
The complete appliance must be properly
grounded at all times when electrical
power is applied.
Do not ground the appliance with the
neutral (white) house supply wire. A
separate ground wire must be utilized.
Improper connection can result in a fire
hazard!
L1
L2
L3
N
GROUND
Three phase wiring diagram
17