Windows Xp; Mac Os - Buffalo WMR-433 User Manual

Windows XP

To configure TCP/IP in Windows XP, follow the procedure below.
1
Open Control Panel.
2
Double-click Network.
3
Right-click the network adapter, then click Properties.
4
Select Internet Protocol (TCP/IP) then click Properties.
5
To have DHCP set your IP address settings automatically, check Obtain an IP address automatically and Obtain DNS
server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.13.1,
IP address: 192.168.13.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.13.1
Preferred DNS server: 192.168.13.1
Alternate DNS server: blank
6
Click OK.

Mac OS

To configure TCP/IP in Mac OS, follow the procedure below.
1
Click Apple menu > System Preferences....
2
Click Network.
3
Click the network adapter.
4
To have DHCP set your IP address settings automatically, select Using DHCP in the "Configure IPv4" field.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.13.1,
IP address: 192.168.13.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.13.1
Preferred DNS server: 192.168.13.1
Alternate DNS server: blank
5
Click Apply.
18