Table of Contents
Advertisement
Chapter 4
Remote Router Access
Remote Management
To permit remote access of the
HiPort+, from outside the local network, select Enable .
Otherwise, keep the default setting, Disable .
Management Port
Enter the port number that will be
open to outside access .
Use HTTPS
HTTPS uses SSL (Secured Socket Layer) to
encrypt data transmitted for higher security . To enable
HTTPS, select the check box .
NOTE:
When you are in a remote location and
wish to manage the HiPort+, enter http://<Internet
IP Address>: port or https://<Internet IP Address>:
port, depending on whether you use HTTP or
HTTPS . Enter the HiPort+'s specific Internet IP
address in place of <Internet IP Address>, and
enter the Administration Port number in place of
the word port .
UPnP
Universal Plug and Play (UPnP) allows Windows 2000,
XP and Vista to automatically configure the HiPort+ for
various Internet applications, such as gaming and video
conferencing .
UPnP
If you want to use UPnP, keep the default setting,
Enable . Otherwise, select Disable .
When you have finished making changes to this screen,
click Save Settings to save the changes, or click Cancel
Changes to undo your changes . Help information is
available on the right side of the screen .
HiPort+ User Guide
Administration > Log
When you click the Administration tab, you will see the
Log screen . It provides you with a log of all incoming
and outgoing URLs or IP addresses for your Internet
connection .
Administration > Log
Log
Log
To access activity logs, select Enable . With logging
enabled, you can choose to view temporary logs . Click
Disable to disable this function .
Incoming Log
The Incoming Log will display a temporary
log of the source IP addresses and destination port
numbers for the incoming Internet traffic .
Log > Incoming Log
Outgoing Log
The Outgoing Log will display a temporary
log of the local IP addresses, destination URLs/IP addresses,
and service/port numbers for the outgoing Internet traffic .
Log > Outgoing Log
Click Refresh to update the log .
When you have finished making changes to this screen,
click Save Settings to save the changes, or click Cancel
Changes to undo your changes . Help information is
Configuration
22
Advertisement
Table of Contents
