Administration > Log; Administration > Diagnostics - Cisco Linksys WRT120N User Manual

Chapter 3
UPnP To use UPnP, keep the default, Enabled. Otherwise,
select Disabled.
Allow Users to Configure
if you want to be able to make manual changes to the
Router while using the UPnP feature. Otherwise, select
Disabled.
Allow Users to Disable Internet Access
if you want to be able to prohibit any and all Internet
connections. Otherwise, keep the default, Disabled.
Backup and Restore
Backup Configuration To back up the Router's
configuration settings, click this button and follow the
on-screen instructions.
Restore Configuration
To
configuration settings, click this button and follow the
on-screen instructions. (You must have previously backed
up the Router's configuration settings.)
System Reboot
Start to Reboot
If you need to restart the Router, click
this button.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Administration > Log
The Router can keep logs of all traffic for your Internet
connection.
Administration > Log
Log
Enabled/Disabled To disable the Log function, select
Disabled. To monitor traffic between the network and the
Internet, keep the default, Enabled. With logging enabled,
you can choose to view temporary logs.
View Log To view the logs, click View Log.
Wireless-N Home Router
Keep the default, Enabled,
Select Enabled,
restore the Router's
Advanced Configuration
Log > View Log
Log
Type Select Incoming Log, Outgoing Log, Security
•
Log, or DHCP Client Log.
<Type> Log The Incoming Log displays a temporary
•
log of the source IP addresses and destination
port numbers for the incoming Internet traffic. The
Outgoing Log displays a temporary log of the local IP
addresses, destination URLs/IP addresses, and service/
port numbers for the outgoing Internet traffic. The
Security log displays the login information for the
browser-based utility. The DHCP Client Log displays
the LAN DHCP server status information.
Click Save the Log to save this information to a file on
your computer's hard drive. Click Refresh to update
the log. Click Clear to clear all the information that is
displayed.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet.
Administration > Diagnostics
24