Advertisement
Function Operation
Batch change the indoor unit mode setting: After setting one unit, tap
and window will pop out as shown in picture 6.
Picture 6
If you choose "All", then all indoor units will operate as ordered.
If you choose "indoor unit selection", then the page will turn to interface
displaying all indoor units, press the indoor unit icons to choose the indoor
units (the chosen ones will turn to dark color), they will operate as ordered.
As shown in picture 6,"1st Floor " "2nd Floor" "3rd Floor" are zoned areas,
choose one area and all indoor units in that zone will operate as ordered.
Renaming Indoor Units
To change the name of an indoor unit: as shown in picture 7, press the air-
conditioner number 26-1, then it will display the textbox "please input device
name". Tap the blank text box to pop out the keyboard. After typing in the
name, press "ENTER" . The name length is limited to 12 characters.
14
Hide quick links:
Advertisement
