Radio; Improving Sound Quality; Checking Signal Status; Manual Tuning - Panasonic SC-HC295 Owner's Manual

SC-HC295 PP TQBJ2048 En.Sp.fm Page 10 Wednesday, February 22, 2017 3:14 PM

Radio

Preparation
Press [RADIO/AUX] to select "FM".

Manual tuning

1
Press [PLAY MENU] repeatedly to select
"TUNEMODE".
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
"STEREO" is shown when a stereo broadcast is being
received.

Memory presetting

You can preset up to 30 FM stations.
█
Automatic presetting
1
Press [PLAY MENU] to select "A.PRESET".
2
Press [R, T] to select "LOWEST" or "CURRENT"
and then press [OK].
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [8].
LOWEST Tuning begins from the lowest frequency.
CURRENT Tuning begins from the current frequency.
█
Manual presetting
1
Press [PLAY MENU] repeatedly to select
"TUNEMODE".
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
4
Press [OK].
5
Press [R, T] to select a preset number and then
press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
10
Confidential
3 Mar 2017
Until:
final draft
█
Selecting a preset station
1
Press [PLAY MENU] repeatedly to select
"TUNEMODE".
2
Press [R, T] to select "PRESET" and then press
[OK].
3
Press [2/3] or [5/6] to select the preset
station.
Improving the sound quality
1
Press [PLAY MENU] repeatedly to select
"FM MODE".
2
Press [R, T] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also canceled when you change the
frequency.
To memorize the setting
Continue with step 4 of "Manual presetting".
Checking the signal status
Press [DISPLAY].
FM The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO "MONO" is selected as the "FM MODE".
The FM signal is in monaural.
FM allocation setting
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
1
Press [RADIO/AUX] to select "FM".
2
Press and hold [SELECTOR] on the main unit.
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• Preset frequencies are erased after you change the
setting.